I/Q Measurement Panel
IQ measurement panel is composed of five tabs:
- I/Q Measurement Panel: General: Set output file path and
name, set measurement stop conditions, define meta-data ...
- I/Q Measurement Panel: Sweep Settings: Define two nested
loops sweep in function of power and frequency.
- I/Q Measurement Panel: Source Setting: Set the waveform to play.
This tab allows defining the IQ waveform which will be loaded by the RF Source. Three waveform loading mode are available :
To learn more see I/Q Measurement Panel: Source SettingNote: Contrary to Modulation Measurements,User Modulation isn't available in I/Q measurement panel because the waveform has to be well-known in order to do the data-processing (resizing, time alignement, ...) and the demodulation step. - I/Q Measurement Panel: Receiver Settings: Define figure of merits (FOM) to measure.
This tab allows defining the I/Q measurement settings and the I/Q data analysis (CCDF, ACPR, Dynamic AMAM/AMPM):
To learn more see I/Q Measurement Panel: Receiver Settings.
- Limits Specifications: identify whether the device is in
PASS or FAIL status compared to a predefined specification.
