Setup Editor

The setup editor contains all the necessary settings before starting any measurement:

• Schematic: identify different setup instruments and define appropriate hardware settings
• Chronograms: when "Pulsed" mode is chosen for DC bias and/or RF signal, a visual overview of the timings is illustrated. It is also possible to re-adjust the timings directly from this window
• Calibrations: create RF calibration files using different calibration wizards and manage old ones
• Files: include data files to use in the setup (test fixture S2P files, …)
• S-Parameters Measurements: perform S-Parameters characterization.
• 1-Tone Measurements: Perform 1-Tone power characterization (CW or Pulsed) versus frequency
• 2-Tones Measurements: Perform 2-Tones power characterization versus spacing versus frequency.
• 3-Tones Measurements: Perform 3-Tones power characterization versus spacing vs frequency (Low Frequency Behavioral Model extraction).
• Video Bandwidth (VBW) Measurements: Perform IMD characterization versus 2-Tones spacing sweep
• Modulation Measurements: Perform Modulated signal power characterization versus frequency
• I/Q Measurements: Perform I/Q waveform power characterization versus frequency
• NPR Measurements: Perform Noise Power Ratio characterization versus frequency using VNA