Files
The file manager interface allows easy management of all the files that will be used by
the setup. There are several types of files managed by this tool:
- S-Parameters Files: 1-Port ou 2-Ports S-parameters files
- Calibration Report Files: Calibration validation files
- Maury Tuners Setup Instructions & Driver Details: MTune calibration files
Note: These files can be opened in the Data Manager, and visualized in the
whiteboard using the Open Selected File(s) button.
S-Parameters Files
1-Port ou 2-Ports S-parameter files which can be used for de-embedding during measurements or calibrations.
To upload these files, click on ‘Add file’ and browse up to the files and select them. These files will be automatically listed in the Available Files table. Since the files are listed, they can be selected in the drop-down menu of the setup configuration.
Once the setup file is saved, all these files will be included and listed when reloading this setup.
Calibration Report Files
These files are automatically generated when a calibration is validated (for more
information see Validate Calibration topic) and also used in
the calibration report.

Important: The files are linked to a
calibration. If the calibration is deleted, the files will be deleted as
well.
