Validate a MultiPath Calibration
Before starting any measurement, it's important to check the calibration. The validation of a calibration can be done at the end of the calibration process to ensure that it was well performed but it can also be done anytime the user wants to check if the calibration of the bench is still within the range of desired accuracy. IQSTAR embeds a Validation Calibration Wizard, which allows to associate a validation report to a calibration ID.
When the calibration to validate is a Multiple Path Calibrations, the validation process is similar to a single path validation. Each path can be selected iteratively to be validated or not. To learn more see: Validate Calibration, Small Signal Validation, Large Signal Validation .
