Tuning Station

Move To Init [Executed Once]

This action will move the tuner at init position.



Important: "Change configuration" action is mandatory before "Move To Init" action to get access to "Hardware" tuner object of setup.

Move To 50Ohms [Executed Once]

This action will move the tuner at 50Ohms position for selected frequency.



Important: "Change configuration" action is mandatory before "Move To 50Ohms" action to get access to "Hardware" tuner object of setup.
Note: "Refresh frequencies" button, is used to read and load the tuner calibration file (*.tun).
  • If the button is "Green", the frequency list has been updated from tuner calibration file.
  • If the button is "Orange", the frequency list is based on memory storaged list saved on the previous update. In this case, if the the setup object in "Change configuration" action has been changed, the frequency list can be outdated.
  • If the button is "Red", the frequency list has not been updated from tuner calibration file.