Jump to main content
  • IQSTAR 1.7
  • Supported Instruments
  • System Information
  • About
  1. Home
  2. IQSTAR 1.7
  3. User's Guide
  4. 3. Measurement
  5. 2-Tones Measurements
  6. 2-Tones Measurement Panel
  • IQSTAR 1.7
    • User's Guide
      • 1. Set Up a Measurement
      • 2. Calibrate a Setup
      • 3. Measurement
        • S-Parameters Measurements
        • 1-Tone Measurements
        • 2-Tones Measurements
          • 2-Tones Measurement Panel
            • 2-tones measurement panel: General
            • 2-tones measurement panel: Sweep settings
            • Limits Specifications
          • 2-Tones Real-Time Measurement Display
        • Video Bandwidth (VBW) Measurements
        • 3-Tones Measurements
        • Modulation Measurements
        • I/Q Measurements
        • NPR Measurements
      • 4. Create a Waveform
      • 5. Automatize a Measurement
      • 6. Analyze Measurement Data
      • 7. Output
      • 8. Script
    • Getting Started
    • Setup Case
    • Tutorials
    • IQSTAR Release Notes

2-Tones Measurement Panel

2-Tones measurement panel is composed of three tabs:

  • 2-tones measurement panel: General: Set output file path and name, set measurement stop conditions, define meta-datas ...


  • 2-tones measurement panel: Sweep settings: Define two, three or four nested loops sweep in function of power, frequency, 2-tones spacing and VSWR.


  • Limits Specifications: identify whether the device is in PASS or FAIL status compared to a predefined specification.


© Copyright 2018-2024 by AMCAD Engineering