Jump to main content
  • VISION 2.4.2
  • Getting started with Device Modeler
  • Getting started with System Architect
  • System Information
  • About
Index
  1. Home
  2. Getting started with Device Modeler
  3. Antenna device
  • Getting started with Device Modeler
    • HPA device
    • Limiter device
    • LNA device
    • MFC device
    • Mixer device
    • Linear device
    • Antenna device
      • Extract an antenna model

        How to extract mix electrical/EM model for antenna (ANT). The ANT model is base on SnP and FFD Data. Extracting this model requires Electrical and EM Data coming from Simulation Domain. It takes into account the dispersive effects present in the antenna band and the mismatch introduce with non_50 Ohms element. The general hypothesis of this model is concerning the Far Field hypothesis. This model is interesting for modeling the load pull effects in modern RF front end.

    • Perform model tests in System Architect

      This tutorial presents a feature that enables automatic configuration of schematics in System Architect for testing HPA and LNA models. The user will be able to run pre-configured simulations to test the model with 2-tone signals, a 5G signal and possibly load-pull simulations. This feature is available for all HPA models and LNA-B-HF model.

Antenna device

To extract a antenna array model, see Extract an antenna model.

© Copyright 2018-2024 by AMCAD Engineering
Documentation VISION 2.4.2 - version 1.1 - rev1 - 2024/11/27