Antenna Array

Antenna Array-  All the ports of the antenna array are grouped in a single multiple-sized node (input).

Figure: Diagram block


Figure: Dialog box


  • Signal type: allows to configure the input signal as complex or real

  • Number of elements: number of radating elements.
  • Data formation : The data file may use the Vision file format if it originates from the extraction of the antenna model in the Device Modeler application. Alternatively, the data file can be in Touchstone or Citifile format.
  • Data type : The data in the model parameter file can be in the form of S-parameters, Y-parameters, or Z-parameters.
  • Add noise : Selecting the "Add Noise" checkbox introduces thermal noise into the simulation.