Value Proposition:
Speed up your measurement time and simplify your bench . The AM3100 PIV system can advantageously replace complex measurement architectures made of multiple DC multimeters or multi channel oscilloscopes combined with external DC power supplies.
Dedicated to:
Device Characterization Labs
VNA-based and Traditional Load-pull users
General Purpose Setups requiring pulsed DC with Voltage and Current measurements
Maury Microwave 1 page Solution Brief
| PURPOSE | GATE |
| OPERATING RANGE | |
| Switched voltage levels | 2 |
| Voltage | ±25V |
| Pulsed current | ±0.2A |
| Source DC | 3W Max |
| Sink DC | 0.5W Max |
| SOURCE PERFORMANCE | |
| Voltage setting resolution | 16bit 1mV |
| Output impedance | ON: 50Ω / OFF: 50mΩ |
| PULSE TIMING | |
| Pulse Timing | Pulse width from 1.1µs to 10s /20ns (Within Power limits) |
| PRF | From 0.1Hz to 200kHz |
| MEASUREMENT PERFORMANCE | |
| V range | 25V |
| I range | 5mA/200mA |
| V & I Meas. Accuracy | 7.5mV+0.1% ; 10µA+0.2% / 100µA+0.2% |
| Settling time | 2-4µs |
| Output connector | BNC |
AM3111 Bipolar SMU +/-25V +/-200mA
The AM3111 SMU is embedded into the AM3100 controller chassis, as a bipolar pulse voltage and current generator.
| PURPOSE | DRAIN |
| OPERATING RANGE | |
| Switched voltage levels | From 0V |
| Voltage | up to +120V |
| Pulsed current | +30A |
| Average & RMS Current | 5A & 10A |
| DC power / Pulse Power | 220W / 3KW |
| SOURCE PERFORMANCE | |
| Output impedance | 0,1Ω |
| PULSE TIMING | |
| Pulse timing | Pulse width from 1.1µs to 10s / 20ns (Within Power limits) |
| PRF | 0.1Hz to 100kHz |
| MEASUREMENT PERFORMANCE | |
| V range | 125V |
| I range | 33A |
| V & I ADC resolution | 16bit |
| Absolute Accuracy | 20mV +0.1% ; 20mA + 0.3% |
| Settling time | 500ns to 95%, 2µs to ADC resolution |
| Output connector | BNC |
AM3121 Probe +120V +30A
The AM3121 probe is compatible with the AM3100 controller and is dedicated to bias transistor drain for general purpose measurements.
| PURPOSE | GATE |
| OPERATING RANGE | |
| Switched voltage levels | 2 |
| Voltage | ±25V |
| Pulsed current | ±0.2A |
| Source DC | 3W Max |
| Sink DC | 0.5W Max |
| SOURCE PERFORMANCE | |
| Voltage setting resolution | 16bit 1mV |
| Output impedance | ON: 50Ω / OFF: 50mΩ |
| PULSE TIMING | |
| Pulse Timing | Pulse width from 1.1µs to 10s /20ns (Within Power limits) |
| PRF | From 0.1Hz to 200kHz |
| MEASUREMENT PERFORMANCE | |
| V range | 25V |
| I range | 5mA/200mA |
| V & I Meas. Accuracy | 7.5mV+0.1% ; 10µA+0.2% / 100µA+0.2% |
| Settling time | 2-4µs |
| Output connector | BNC |
AM3111 Bipolar SMU +/-25V +/-200mA
The AM3111 SMU is embedded into the AM3100 controller chassis, as a bipolar pulse voltage and current generator.
| PURPOSE | DRAIN |
| OPERATING RANGE | |
| Switched voltage levels | From 0V |
| Voltage | up to +120V |
| Pulsed current | +30A |
| Average & RMS Current | 5A & 10A |
| DC power / Pulse Power | 220W / 3KW |
| SOURCE PERFORMANCE | |
| Output impedance | 0,1Ω |
| PULSE TIMING | |
| Pulse timing | Pulse width from 1.1µs to 10s / 20ns (Within Power limits) |
| PRF | 0.1Hz to 100kHz |
| MEASUREMENT PERFORMANCE | |
| V range | 125V |
| I range | 33A |
| V & I ADC resolution | 16bit |
| Absolute Accuracy | 20mV +0.1% ; 20mA + 0.3% |
| Settling time | 500ns to 95%, 2µs to ADC resolution |
| Output connector | BNC |
AM3121 Probe +120V +30A
The AM3121 probe is compatible with the AM3100 controller and is dedicated to bias transistor drain for general purpose measurements.
